CP Electronics MWS3A-AT-PRM Panduan Produk - Halaman 16
Jelajahi secara online atau unduh pdf Panduan Produk untuk Sensor Keamanan CP Electronics MWS3A-AT-PRM. CP Electronics MWS3A-AT-PRM 17 halaman. Rd ceiling microwave presence detector-switching
Juga untuk CP Electronics MWS3A-AT-PRM: Panduan Instalasi (20 halaman)
Halaman Cetak
Technical data
Dimensions
Weight
Supply Voltage
Frequency
Maximum Load
Power consumption
Terminal Capacity
Receiver Class
Transmitter Duty Cycle
Range
Temperature
Humidity
Material (casing)
Classifications
Safety
Microwave and RF frequency compatibility
The allowable frequency of operation of this product is different depending on region. Please select the correct order code using the table below.
Suffix 1 Suffix 2
blank
blank
UK, China, India, Middle East, Malaysia, Hong Kong, Singapore
-R2
blank
All of Europe except: UK, France, Portugal, Germany, Switzerland,
Austria, Slovak Republic, Republic of Ireland
-R3
blank
France, Portugal, Switzerland
-R4
blank
Germany, Austria, Slovak Republic
-R5
blank
Republic of Ireland
-R2
-A2
Australia and New Zealand
Part numbers
Part number
Detector
MWS3A-AT-PRM
Accessories
MWS3A-DBB
UHS4
UNLCDHS
IMPORTANT NOTICE!
IMPORTANT NOTICE!
This device should be installed by a qualified electrician in
This device should be installed by a qualified electrician in
accordance with the latest edition of the IEE Wiring
accordance with the latest edition of the IEE Wiring
Regulations and any applicable Building Regulations.
Regulations and any applicable Building Regulations.
Due to our policy of continual product improvement CP Electronics reserves the right to alter the specification of this product without prior notice.
16
See diagrams opposite
0.1kg
230VAC +/- 10%
50Hz
Channel 1 (switching):
10A of lighting and/or ventilation
including incandescent, fluorescent,
compact fluorescent, low voltage (by
switching the primary of transformer).
On 2100mW, Off 1300mW
2
2.5mm
2
<10% on g3 band (default band)
<0.1% on g2 band
<1% on g1 band
The maximum RF range between An-10
devices is 100m in free air and up to 30m
indoors. However the materials used within
a building will vary and this will impact upon
the RF range. In reality the nature of how
the An-10's hybrid-mesh works means that
in most scenarios the individual range of an
An-10 product will not be important.
0ºC to 35ºC
5 to 95% non-condensing
Flame retardant ABS and PC/ABS
Insulation Class II
Purpose
Sensing control
Construction
Independently mounted
control for flush mounting.
Type of action
Type 1.B action (micro
disconnection).
Pollution
Degree 2
Software Class A
Rated impulse voltage, 4000V
The microwave radiation emitted by these
units is extremely low power and complies
with ANSI standard "IEEEC95.1-1999
Standard for Safety Levels with Respect to
Human Exposure to Radio Frequency
Electromagnetic Fields 3kHz 300GHz."
Region
Description
RF Ceiling microwave presence detector - switched
Surface mounting box
Programming IR handset
Universal LCD IR handset
MWS3A-AT-PRM
MWS3A-DBB
Hereby, CP Electronics Ltd, declares that this MWS3A-AT-DD is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC. The declaration of conformity
may be obtained for CP Electronics Ltd Brent Crescent, London, NW10 7XR, UK.
UK patent GB2498568 and international patents applied for
RF Frequency
868MHz
868MHz
868MHz
868MHz
868MHz
915MHz
MW frequency
Compliance
10.687GHz
EN300 220-2 V2.1.2
EN301 489-1 V1.8.1
10.525GHz
EN301 489-3 V1.2.1
LVD-2006/95/EC
9.900GHz
9.350GHz
10.41GHz
10.525GHz
AS/NZS 4268:2008
C.P. Electronics Ltd
Brent Crescent
London
NW10 7XR
United Kingdom
Tel:
+ 44 (0) 333 900 0671
Fax:
+ 44 (0) 333 900 0674
www.cpelectronics.co.uk
Ref: #WD383
.
Issue 2.1