Avonic CM-CON100 Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pengontrol Avonic CM-CON100. Avonic CM-CON100 10 halaman. Ptz camera controller
Juga untuk Avonic CM-CON100: Panduan Pengguna (12 halaman), Panduan Pengguna (13 halaman), Panduan Pengguna (11 halaman), Panduan Pengguna (16 halaman)

Halaman Cetak

CAMERA (Switch cameras) Input camera number, then press CAMERA key to switch to

another camera.

SET (Set / Clear preset) Input preset number, then press SET key to set or delete a preset

(Short press to "set"; long press to "clear").

SETUP (Enter setup menu) Press SETUP key to enter menu and program the keyboard

CRUISE (Auto Cruise) Press CRUISE key to do auto cruise.

PATTERN (Pattern Scan) Press PATTERN key to do pattern scan

F1, F2 Toggle between Auto Focus and Manual Focus

SHIFT (Extension key) It is an extension key to be used with other keys for special

functions.

10.

ESC (Exit / Delete) It is a key to EXIT in a menu or DELETE in other operations.

11.

0~9 (Numbers) Those are keys used to input numbers. Combine with SHIFT key to

activate various functions shown on number keys. For example, press SHIFT + 1 will turn

on DIS function of the camera.

12.

ENT (Confirm) It is used to confirm menu setting.

13.

OPEN ( IRIS Open) This key is used to activate IRIS open of the camera. It is also a

"confirm" key in a menu.

14.

Joystick This joystick is used to Pan, Tilt, Zoom and Focus

Non-Menu State:

Left/Right/Up/Down: Pan/Tilt the camera correspondingly

Twist clockwise: Zoom In,

Twist anti-clockwise: Zoom Out;

Press Zoom/ Focus Switch Key and Twist: Focus Near/Far

Menu State:

Right: Enter a submenu or Confirm;

Left: Return to previous menu or exit (expect some not returnable menus);

Up: Move to last option;

Down: Move to next option.

15.

CLOSE ( IRIS Close) This key is used to activate IRIS close of the camera; it is "return" key

in a menu.

16.

Status Display area This area is used to display status of functions that are turned on,

relative icons will be back lighted.

17.

MENU (Enter Camera Menu) This key is used to enter camera menu.

18.

Zoom / Focus Switch Key This key is used to switch between zoom and focus function.

Operation: Press this key, the crisscross of indicator lighter near the joystick will go out,

twist the joystick to zoom in / out; press this key again, the crisscross of indicator lighter

will be lightened, twist the joystick will adjust focus value.