Billet Specialties 13820 Panduan Instalasi - Halaman 19
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Mesin Billet Specialties 13820. Billet Specialties 13820 20 halaman. Small block chrysler
Halaman Cetak
A
B
Figure 16: Install Compressor Manifold
If you are going to be installing your air conditioning hoses and charging
the system at this time, remove the cover plate on top of the
compressor body.
A,B] Apply anti-seize to the two 8mm-1.25 x 25mm socket head cap
screws. Install compressor manifold onto compressor and thread the two
8mm socket head cap screws through the manifold and into the
compressor, tighten firmly (25 ft/lbs.)
Install hoses, connect clutch wire and charge system.
Important
If you are NOT installing hoses and charging the system at this time, place
the compressor manifold and hardware in a safe place and leave cover
plate on compressor.
Do not connect the clutch wire or apply power to clutch wire without the
hoses connected and the system charged – Serious damage will occur
to compressor.
Compressor Oil
Although the compressor is supplied with oil, the level may not be correct
for the entire system. Consult the instruction manual of the air
conditioning unit for proper levels and system charging procedure.
19
www.billetspecialties.com