Avonic CM-CON100 Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pengontrol Avonic CM-CON100. Avonic CM-CON100 13 halaman. Ptz camera controller
Juga untuk Avonic CM-CON100: Panduan Pengguna (12 halaman), Panduan Pengguna (10 halaman), Panduan Pengguna (11 halaman), Panduan Pengguna (16 halaman)

Halaman Cetak

1. Set/Call Preset Position

Product Description

OLED screen. The OLED screen displays status of current operation.

CALL (Call preset) Input preset number, then press CALL key to call a preset

CAMERA (Switch cameras) Input camera number, then press CAMERA key to switch to

another camera.

SET (Set / Clear preset) Input preset number, then press SET key to set or delete a preset

(Short press to "set"; long press to "clear").

SETUP (Enter setup menu) Press SETUP key to enter menu and program the keyboard

CRUISE (Auto Cruise) Press CRUISE key to do auto cruise.

PATTERN (Pattern Scan) Press PATTERN key to do pattern scan

F1, F2 Toggle between Auto Focus and Manual Focus (also see 18.)

SHIFT (Extension key) It is an extension key to be used with other keys for special

functions.

10.

ESC (Exit / Delete) It is a key to EXIT in a menu or DELETE in other operations.

11.

0~9 (Numbers) Those are keys used to input numbers. Combine with SHIFT key to

activate various functions shown on number keys. For example, press SHIFT + 1 will turn

on DIS function of the camera.

12.

ENT (Confirm) It is used to confirm menu setting.

13.

OPEN ( IRIS Open) This key is used to activate IRIS open of the camera. It is also a

"confirm" key in a menu.

14.

Joystick This joystick is used to Pan, Tilt, Zoom and Focus

Non-Menu State:

Left/Right/Up/Down: Pan/Tilt the camera correspondingly

Twist clockwise: Zoom In,

Twist anti-clockwise: Zoom Out;

Press Zoom/ Focus Switch Key and Twist: Focus Near/Far

Menu State: