Billi Quadra Panduan Pengguna - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Perlengkapan Dapur & Kamar Mandi Billi Quadra. Billi Quadra 12 halaman. Xl, xt, xr tap options
Juga untuk Billi Quadra: Panduan Pengguna (13 halaman), Panduan Instalasi (8 halaman), Panduan Instalasi (7 halaman)
Halaman Cetak
User guide
Billi Quadra & Quadra Plus.
Instructions
—Normal Display Current status may be displayed as follows
TIMESWITCH ON/OFF
OVERRIDE ON/OFF
LOCKED ON/OFF
SAFETY SWITCH
STANDBY
—Daylight saving
Time adjustment for daylight saving is
made by pressing either the START or
FINISH buttons at the beginning or end
of daylight saving .
—Menu
To access the menu, press the
button . The menu functions are:
– To move the highlighted cursor, press
the
or
buttons .
– To activate the highlighted cursor,
press
SELECT .
– To return to previous screen, press
—Setting time and date
Screen shows currently set time, day and date .
– Press
or
buttons to move the highlighted
cursor .
– Press
SELECT to activate . The highlighted
item flashes .
6
Indicates the Quadra has been switched ON or OFF by the inbuilt
time switch control . During OFF mode, the dispenser icons are
off and give a brief orange flash once every 10 seconds .
The Quadra can be manually turned ON or OFF by pressing the
ON/OFF button . The status remains as selected for a period
of 2 hours, after which it returns to automatic ON/OFF control .
The ON/OFF status can be permanently locked ON or OFF .
Use ON if 24 hour, 7 days a week service is required; or OFF if
user is going away for an extended period . To activate or deactivate:
press the
ON/OFF button and hold down until the required status
is displayed .
The child proof safety Switch mode has been activated . To set,
refer to Options, page 7 .
A period of non-use has elapsed and the Quadra has switched to
the energy saving standby mode .
SELECT
BACK .
– When flashing, press
setting .
– Press
SELECT . Highlighted cursor stops
flashing . Cursor automatically advances
to next setting . Repeat above activation
procedure .
– Press
BACK once to return to previous
screen or twice to return to normal display .
—Setting time switch
Screen shows active and non-active days .
Turn-on and Turn-off times for active days
are displayed .
– Press
or
buttons to move the
highlighted cursor .
– Press
SELECT to activate . The highlighted
item flashes .
– When flashing, press or to change setting .
– Press
SELECT to confirm and advance
to next setting . Repeat above activation
procedure .
– Press
BACK twice to return to
normal display .
or
to change