Billi Sahara Panduan Pengguna - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Perlengkapan Dapur & Kamar Mandi Billi Sahara. Billi Sahara 12 halaman.
Juga untuk Billi Sahara: Panduan Instalasi (8 halaman), Instal Manual (7 halaman)
Halaman Cetak
User guide
Billi Sahara & Sahara Plus.
– If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in
order to avoid creation of a hazard .
– Billi hose sets as supplied with the
appliance are to be used . Old or other
manufacturer's hose sets should not
be re-used .
– If the appliance is located where the
ambient air temperature could fall below
4°C when the heater is not in use, do not
turn off the power supply to the appliance .
This safeguard does not offer the same
protection to the connecting pipework
and fittings .
– The ambient temperatures this unit
should operate within are 4°C to 45°C .
– Turn off power to unit, by unplugging the
power cord from the power point, if water
supply is turned off
Caution and safety
Boiling water is dangerous and can
cause severe burns, particularly with
young children . Boiling water must always
be handled with caution . Use this appliance
only as directed in these instructions and
only for the purpose for which it has been
designed . Your Billi Sahara is designed to be
safe and practical . In an environment with
young children, it is recommended that the
boiling water safety switch is activated .
The following safety features have been
included:
– Ergonomic levers
– Levers/touch activations located
safely above water outlet .
– Smooth electronically controlled boiling
water flow rate . Flow is briefly reduced as
water first enters cup to prevent splashing .
– Dispenser remains cool to touch .
– Childproof safety switch .
– Boiling water Safety Isolation mode .
General Maintenance
Your Billi Sahara has been designed to require
minimal maintenance other than replacement
of filter cartridges . During each filter change,
check all water connection fittings for signs
of leakage . Check all tubing for any signs of
damage . Check the cupboard area around the
base of unit for any signs of moisture . Ensure
side vents of the under bench module are kept
clear and airflow is not obstructed . Restricted
airflow will cause inefficient operation of the
refrigeration system .
—Cleaning the dispenser
Your Billi Sahara Dispenser is fabricated
from robust metal with a tough protect
chrome plating . Care of dispenser is as
with any chrome plated tapware . Avoid using
abrasive cleaners . Wipe clean using a damp
cloth . Use of a non-solvent, non-smearing
cleaner such as Windex is recommended .
Do not pour water over dispenser .
Cupboard ventilation requirements
Your Billi Sahara underbench module requires
no cupboard ventilation but requires air
space around the unit of 25mm . Care should
be taken when using the cupboard space,
to avoid stretching or damaging plastic pipe
work . Check fittings and tubing at each filter
change for signs of damage or leakage .
Always ensure access to power switch
and water supply tap is not restricted .
3