AvonSynth AVS-MIDI-1 Panduan Pengguna

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Konverter Media AvonSynth AVS-MIDI-1. AvonSynth AVS-MIDI-1 7 halaman. Midi to cv converter

Halaman Cetak

The

User Guide

Thank you for purchasing from AvonSynth

Congratulations on your purchase of a brand new AvonSynth AVS-MIDI-1

MIDI to CV Converter Module. We trust that it will both serve and

inspire you as you create beautiful music with it for years to come.

In order to get the most out of your module, please ensure that you read

this User Guide in its entirety so that you fully understand all of its

functionality, and that you follow all necessary safety directions during use.

Included in the Box

1 x MIDI to CV Module

Installation

Step 1: Power your system oﬀ. Place the module in your Eurorack-

compatible rack in any convenient position. Aﬃx the module to your

rails using the included mounting screws and nylon washers. Neglecting

to use these washers may result in unnecessary marking of the unit.

Step 2: Triple check the polarity of the power connector before

connecting the power cord to your power supply. Ensure that the -12v

line marked on the back of the module connects to the same end of the

ﬂat-cable that also connects to the -12v line on your power supply. While

AvonSynth modules use shrouded connectors that make this process

safer and more reliable, some systems do not conform to this polarity

standard, so careful checking is always necessary. Connecting the

module with incorrect polarity can result in irreversible damage done to

the module which cannot be covered by warranty.

Step 3: Power up your system and start patching!

www.AvonSynth.com

1 x 16 pin to 16 pin

ﬂat-cable power cord

AVS-MIDI-1

MIDI to CV

Converter

4 x M3 Mounting Screws

4 x Nylon Washers

Page 1 of 7