ABACUS Challenger 1 LED-1500W Panduan Instalasi - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Lampu luar ruangan ABACUS Challenger 1 LED-1500W. ABACUS Challenger 1 LED-1500W 12 halaman.

Halaman Cetak
2
•
Install the floodlight on the
mounting bracket with an M20
(grade 8.8 or higher) nut and bolt
(max torque settings 500Nm)
•
Install the driver mounting
brackets for the top floodlight with
the bolts included.
4x
5
•
Install the driver for the bottom
floodlight with the bolts included.
3
•
Install the driver on the top
floodlight's driver mounting
brackets with the bolts included.
4x
1x
6
•
Remove the driver terminal covers
on both drivers (4 bolts T20 Torx).
•
Remove the cable gland ① on
both drivers.
4x
6
4
•
Lower the bottom floodlight as
shown below and install the
driver mounting brackets with the
bolts included.
7
•
Install the DC output cables with
gland ① into the drivers (gland to
body torque settings 3.43Nm)
•
Install the Surge Protection
Devices ② into both brackets.
①
①
4x
①
②