AVPro Edge AC-EX100-444-KIT Panduan Memulai Cepat - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Pemanjang AVPro Edge AC-EX100-444-KIT. AVPro Edge AC-EX100-444-KIT 8 halaman.

AVPro Edge AC-EX100-444-KIT Panduan Memulai Cepat
USB Extension (AC-EX100-444-KIT only):
In addition to Ethernet passthrough, the AC-EX100-444-KIT adds USB extension and supports ARC (Audio Return
Channel).
-USB extension will allow you to control a computer 100 meters away with a keyboard or mouse, connect a USB
camera, connect a hard drive or thumb drive; the options are endless!
-ARC enables a TV to send audio upstream to an AVR or surround sound processor. The AC-EX100-444-KIT can send the
ARC signal from the Rx all the way back to the Tx.
To use USB extension:
1.
Plug the device that you'd like to extend (keyboard, mouse, camera, etc) into the "USB HOST" connection on the
Tx (*NOTE this is a USB type "B" connector. You may need an adaptor to fit your specific device).
2.
The Rx has 4 USB connections. This is where you plug in the device that you'd like to control (PC, TV, etc).
To use ARC:
1.
Using an HDMI cable that supports ARC, plug the output of the AVR into "HDMI IN" on the Tx.
2.
Using an HDMI cable that supports ARC, connect the display's input into "HDMI OUT" on the Rx
3.
On both the Tx and Rx, be sure to flip the "AUDIO OUT" switch to "ARC"
*NOTE - Be sure that the device (ex. AVR) and TV both support ARC, and that ARC is turned on
in each device. These settings can usually be found in the "Audio Settings" menu, but you can always check the owner's
manual to be sure.
*NOTE - The AC-EX100-444-KIT supports audio extraction, but uses a Toslink cable instead of a L/R analog stereo cable