Aqua PRO APEX Series Panduan Pemilik - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Pompa Air Aqua PRO APEX Series. Aqua PRO APEX Series 20 halaman.

Installation (continued)

Figure 2

PRIOR TO PRESSURE TESTING

□ Securely tighten knobs, drain fittings, lid, and system

accessories.

□ Air may collect at the highest point in the plumbing

system. Normally an air purge valve is provided with the

pool filter. Consult your pool filter instruction manual for air

purging instructions.

□ The basket lid must be rotated and locked into position as

indicated in Figure 3.

□ Test system at a water pressure of 25 psi or less.

□ Water Temperature for test must be less than 100° F.

□ After 24 hours visually check the system for leaks.

POOL PUMP SUCTION REQUIREMENTS

WARNING: Pump suction is hazardous and can trap, drown or disembowel bathers. Do not use or operate swimming pools or spas if a

suction outlet cover is missing, broken, or loose. Follow the guidelines below for a pump installation which minimizes risk to users of pools and

spas.

DANGER: Ground the motor before connecting to electrical power supply. Failure to ground the motor may cause severe or fatal electrical

shock hazard.

ENTRAPMENT PROTECTION

The pump suction must be designed to eliminate the possibility of suction entrapment or hair entrapment/entanglement.

SUCTION COVERS

All suction inlet covers must be maintained and replaced if cracked, broken, or missing. See Figure 2 for outlet cover certification

Figure 3 - Clamp rings

Please contact 1-877-278-2797 for further assistance.

ECOAQUAPRO.COM