AVPro Edge AC-DA210-HDBT Panduan Pengoperasian - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Kabel dan konektor AVPro Edge AC-DA210-HDBT. AVPro Edge AC-DA210-HDBT 19 halaman. Hdbaset 2-8-2 splitter with audio de-embedding, edid management, and switchable inputs

Halaman Cetak
AC-DA210-HDBT
Audio:
The extracted audio is always active by default, you may simply plug into any/all
of the ports (Toslink, SPDIF, 2CH) and the audio will be output based on the active
source. Additional audio commands can be sent by RS-232.
IR Routing:
IR can be routed in three ways
1. To the remote (HDBaseT Receiver) end by inserting an IR Receiving Eye
into the IR In port on the AC-DA210-HDBT.
2.
Back out of the IR Out port on the AC-DA210-HDBT by placing an
IR Receiving Eye in the AC-EX70-UHD Receiver's IR In port
3.
Directly from a control system using a cable as designed below.
Page 10