AVPro Edge AC-MXNET-10G-SW12C Panduan Memulai Cepat - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Perangkat Keras Jaringan AVPro Edge AC-MXNET-10G-SW12C. AVPro Edge AC-MXNET-10G-SW12C 8 halaman. The mxnet 10g sdvoe ecosystem
7: Setup and Control using Mentor
Home
- SYSTEM UTILITIES
After successfully logging in, users will be taken to the Mentor home screen with SYSTEM UTILITIES
as the default page. This page shows the IP address for MXNet and the current firmware version
on the CBOX. From here, the MXNet devices can be updated to their latest versions of firmware,
along with options to reboot the CBOX, reboot/remove the transceivers, and also factory reset
them.
Configure
- INPUTS & OUTPUTS
This page is where users can configure the transceivers, including assign custom names and
descriptions (limit of 12 characters), set the input EDID's and output resolution scaling, adjust the
front panel LEDs, and check the current version of firmware on the transceivers. The SYSTEM
DIAGNOSTICS page provides useful troubleshooting information on the speed and quality of the
link and signal strength, the video and audio signal coming through, detect and reset HDMI hot-
plug events, view HDCP versions, and more.
Page 6 of 8
MXNET 10G SDVoE
®
Quick Start Guide