DFI EC910-8MM Panduan Instalasi Cepat - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Instalasi Cepat untuk Perangkat Keras Komputer DFI EC910-8MM. DFI EC910-8MM 16 halaman. Nxp i.mx8m mini processor ruggedized fanless embedded system
Juga untuk DFI EC910-8MM: Panduan Pengguna (15 halaman)

Halaman Cetak

Installing an Antenna

Before installing the antenna, please make sure that the following safety cautions are

wellattended.

1. Make sure the PC and all other peripheral devices connected to it has been

powered down.

2. Disconnect all power cords and cables.

Step 1:

There are antenna holes reserved on the right side of the system and by default

covered by rubber plugs. Please remove the plug prior to installing an antenna.

Step 2:

Connect the internal cable to the board's antenna connector, screw the antenna

connector through the antenna hole with washers and nuts, and screw on the

antenna as illustrated below.

Antenna

Chassis Wall

Module Connector

Cable

Antenna Connector

Washer

Nut

Quick Reference | EC900-8MM / EC910-8MM