ABACUS Gemini 2000 Panduan Pengguna - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Perlengkapan Kamar Mandi ABACUS Gemini 2000. ABACUS Gemini 2000 18 halaman.

Fig 1

Fig 2

Fig 3

Gemini 2000 User Manual v1.3

AUTOFILL OPTION

If the bath has the Autofill option, the bathing cycle can be completed

without having to worry about overfilling. Simply press a button and the

bath will fill automatically.

Filling the Bath

The autofill has two buttons for operation and one spout, the red

button for hot water and the blue button for cold.

Press the red or blue fill button situated on the rim of the bath. Fig 1.

The autofill buttons will glow on standby, and flash during filling.

This will fill the bath to a pre-set fill level. Fig 2.

Once the pre-set fill level is reached the water will automatically stop. If

at any time you wish to stop the autofill process simply re-press the

button.

The system allows you one additional top up past the pre-set fill level.

Press the red or blue fill button; this will deliver water for a maximum

of 30 seconds. Once again the flow can be stopped by re-pressing the

button.

The red fill button supplies hot water at a pre-set temperature (usually

43°C). To reduce the temperature of the bath water during the autofill

process, press the blue (cold) button. Fig 1.

When the bath filling is complete check the water temperature before

the bather enters, or for 'walk-in baths' the user can stop, start or

modify flow temperature as required throughout the autofill process.

Note – Once the maximum fill level has been reached, water must be

drained before any more water can be added. Fig 2.

If you are unable to top up, drain water to below the pre-set

fill level.

Tamperproof Lock Out - Fig 3.

The autofill has a lock out to prevent wastage of water and tampering.

To Lock

Press and hold down both hot and cold buttons for 10 seconds. The red

and blue LED lights will go out, confirming water lock out.

To Unlock

Press and hold down both buttons again for 10 seconds. The buttons

will turn red and blue confirming unlock.

For optimum performance it is recommended that the bath is cleaned

regularly.