ABACUS Gemini 2000 Panduan Pengguna - Halaman 16
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Perlengkapan Kamar Mandi ABACUS Gemini 2000. ABACUS Gemini 2000 18 halaman.
CLEANING INFORMATION
The Gemini bath does not require any major maintenance, but you should follow these simple instructions.
The bath should be wiped down, preferably whilst the bath is draining, with a soft, damp cloth.
To retain the surface quality of the bath, clean weekly using bathroom cleaning mousse or washing-up
liquid. Warm water and a soft cloth is recommended. Stubborn stains may require a non-scratch liquid
cleaner.
Do not use oven cleaners, scouring powders or bleach on any of the surfaces. These may spoil the
appearance of your bath.
Chalk mark deposits from the water or mild scratches may be removed from the bath surface with a mild
cutting fluid such as 'T' Cut or Brasso. This should be applied to the affected area with a soft cloth and
rubbed vigorously until a satisfactory finish is affected. The shine to the area may then be brought back
using a wax-based polish.
Lift the platform and ensure that it is properly cleaned on its underside.
WARRANTY
This product is warranted as being free from defects during the period of warranty. This does not cover
minor blemishes, etc. which may be part of normal manufacturing processes.
The warranty covers manufacturing defects in the products, starting from the date of supply. The warranty
is limited to the value of the purchase price paid.
The warranty is only valid if the product has been used correctly. Where there are any mechanical or
electrical parts, any damage, misuse or tampering with them will render the warranty invalid. Any sealed
electrical boxes must remain unopened or this will invalidate any warranty.
The baths are not covered for any problems that may arise from the installation or site planning unless
carried out by engineers from Abacus Healthcare.
Any consequence arising from unskilled or incorrect handling of the product is not covered by this
guarantee.
The following items, when supplied by Abacus Healthcare are guaranteed for a period of
twelve months from the date of supply for the parts only (labour costs are not covered).
• Taps and mixers
• Shower hoses, shower heads and shower brackets.
• Flexible pipes including waste outlet, hot and cold supply.
Hot and cold taps and mixer taps are proprietary fittings and as such carry a standard manufacturer's
warranty.
Note: Thermostatic mixing valves must be adjusted for the appropriate discharge
temperature by the installer. These require regular maintenance for which Abacus engineers
are available.
• Electrical
All electrical components are CE marked to comply with current European Standards.
Electrical items must not be replaced with alternative components without the authorisation of Abacus
Healthcare
Failure to obtain such authorisation will exempt the Company from any liability to action for further failure.
Gemini 2000 User Manual v1.3
16