DFI KS-SD Series Panduan Instalasi - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Panel sentuh DFI KS-SD Series. DFI KS-SD Series 17 halaman.

Removing the Chassis Cover

1. Make sure the system and all other peripheral devices connected to it

have been powered-off.

2. Disconnect all power cords and cables.

3. The 6 mounting screws on the rear side of the system are used to

secure the cover to the chassis. Remove these screws and put them in a

safe place for later use.

4. Lift the cover to open the system.

5. The Mini PCIe, M.2 and the SODIMM slots are readily accessible after

removing the chassis cover.

Mini PCIe

Sockets

Mounting Screw

SATA drive bay