AVS RXPRO Panduan Instalasi - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Alarm Mobil AVS RXPRO. AVS RXPRO 10 halaman. 4-channel controller
Halaman CetakLATCHED OR PULSED OUTPUT
1.
Enter programming mode (see page 3)
2.
3.
4.
5.
NORMALLY OPEN OR NORMALLY CLOSED OUTPUTS
1.
Enter programming mode (see page 3)
2.
3.
4.
5.
Press button 3 repeatedly until the channel lights indicate one of
the output channels you wish to program.
Press button 2 until the feature lights are on as shown.
OR
Press button 3 repeatedly until the channel lights indicate one of
the output channels you wish to program.
Press button 2 until the feature lights are on as shown.
OR
Press button 1 to swap the feature light(s) between flashing
and not flashing.
Flashing
Latched Output.
Press and hold button 2 on the remote control until the lights
start scrolling.
The output has now been programmed.
Press button 1 to swap the feature light(s) between flashing
and not flashing.
Flashing
Normally
Open
Output.
Press and hold button 2 on the remote control until the lights
start scrolling.
The output has now been programmed.
Not Flashing
Pulsed Output. If Timed Output is
turned on then the output will pulse
for the programmed time. See Timed
Output.
Not Flashing
Normally Closed Output
Page 5