CPG 351IDCPG19A Panduan Pengguna - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Rentang CPG 351IDCPG19A. CPG 351IDCPG19A 10 halaman. Induction range
User Manual
Operation
•
DO NOT use the appliance if it shows any sign of damage or malfunction . Please contact customer service .
•
DO NOT place empty cookware on the appliance and DO NOT leave cookware on the appliance for too long to avoid
liquid cooking off completely . Overheating the cookware will activate the boil dry protection of the device .
•
The unit will automatically shut OFF after 10 continuous hours of use as a built-in safety feature . You may turn it
back ON and continue using it .
Please follow the sequence below when adjusting the appliance. You can adjust power level, temperature, and
cooking time (minutes) by using the rotating knob to increase or decrease.
•
Power Levels: 1/2/3/4/5/6/7/8/9/10 . . .30 . Defaults to 15 .
•
Temperature Levels: 90/95/100/105/110/115/120 . . .460°F . Defaults to 200°F .
•
Time Pre-Setting: 0 – 180 minutes (in 1 minute increments) . Defaults to 180 minutes if not set .
1 . Always place suitable cookware filled with food centered onto the induction cooking plate before plugging in
unit or error function will occur (See Troubleshooting on Page 8) .
2 . Insert the plug into a suitable socket . After the unit it plugged in, a long acoustic signal will sound and the display
will show "----" .
3 . Pushing the Rotating Knob will switch the device into Standby Mode . The display will show "0000" and a short
acoustic signal will sound . Whenever you press button again or new button, a short acoustic signal will sound .
4 . Pressing the
button will turn on the inside fan automatically . The display will now show 15, this is an
automatic setting . The appliance is now in power mode . Set the desired power (1-30) by rotating the knob .
5 . Press the
button to program the temperature model . Set the desired temperature (90 - 450°F) by rotating
the knob .
6 . If desired, press the
rotating the knob in 1 minute increments . This is an optional timer . If you do not set the timer, it will default to
180 minutes .
7 .
The
function is a quick-select low-medium temperature (~155°F) for holding the product .
8 . Cooking time will be indicated at the display by counting down the minutes . When cooking time is finished, this
will be indicated by several acoustic signals and the unit will keep working .
9 . This unit will heat continuously until the "OFF" switch is pressed . It is recommended that you only use the unit
for 2-3 hours at a time to lengthen the life of the unit . The fans will continue to run for 20 minutes after the unit
is turned OFF . DO NOT restrict airflow to cooling fans .
8
button to program the cooking time . Adjust the desired cooking time (0 - 180 min .) by
www.cookingperformancegroup.com
.