CPG 351FGC200K Panduan Servis - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Servis untuk Oven Konveksi CPG 351FGC200K. CPG 351FGC200K 18 halaman. Gas powered convection ovens

Service Manual

351FGC100(L/N) | 351FGC200(L/N)K

351FGC100DD(L/N) | 351FGC200DD(L/N)K

Door Switch

Disconnect wires from rear of switch. Check continuity between terminals when switch lever

is in 'CLOSED', position. If continuity is not found in 'CLOSED' position, replace switch. If

found, see below for more testing.

With wires disconnected, check for no continuity between terminals when switch lever is

'OPEN'. If continuity is found, replace switch. If not found, see below.

With unit 'ON' and unit plugged in, check for 120 volts from each terminal to neutral when

switch is 'CLOSED', (Fig. 18) image shows terminal closest should only have 120 volts when

door is closed.

Check for any discoloration or deformations of electrical connections. If any are found,

replace connections.

Fig. 17

With unit 'ON', plugged in and unit calling for heat, check for 24 volts between terminals.

Replace if no voltage is found or light does not light (Fig. 19).

Check for any discoloration or deformations of electrical connections. If any are found,

replace connections.

Fig. 19

Fig. 18