Billion BiPAC 5200 Panduan Pemasangan Cepat - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Pemasangan Cepat untuk Perangkat Keras Jaringan Billion BiPAC 5200. Billion BiPAC 5200 7 halaman. Bipac 5200 series adsl2/2+ modem/routers
Juga untuk Billion BiPAC 5200: Panduan Memulai Cepat (10 halaman), Spesifikasi (2 halaman), Panduan Memulai Cepat (15 halaman), Panduan Produk (20 halaman)
Halaman Cetak
7. After the settings are saved you should be connected to you Service Provider.
8. Under Interface Setup you can click on Wireless should you wish to access
the advanced wireless configuration fields.
9. Confirm any changes you make to your wireless settings by clicking Save.
10. For further advanced configuration please access the full manual on the CD
provided.
3.1 Troubleshooting the connection:
1. Check that the ADSL light on the front of the router has turned to rapid
flashing or solid. This can take up to 1 minute after switching on. (If the
ADSL light continues to flash slowly then the router is not detecting an ADSL
signal and you should contact your Service Provider immediately)
2. Ensure your username and password are correct – your username should read
3. Ensure you have a filter attached to the master socket, and check there are no
phones connected to any extensions that do not have a filter.
If you still can't get a connection after checking the above – disconnect all phones,
sky boxes, fax machines etc., double–check that all cables are correctly connected and
filters properly attached, restart the router, and try again.
If this still fails then we suggest you contact your Service Provider for further advice.
(or something similar).
6