avsi citronic CM15 Panduan Pengguna - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Monitor avsi citronic CM15. avsi citronic CM15 4 halaman. Stage wedge monitors

Halaman Cetak

Operation

When all signal connections are made, turn down the MASTER volume and connect to mains using the

supplied IEC lead to the mains inlet (16). Switch on the power and a green POWER LED (5) will light.

Turn up the MASTER control gradually, checking input signal(s) and gradually adjusting the VOLUME A and

VOLUME B controls until the required volume is reached.

Corresponding to the output signal are a SIG (signal) and CLIP LED. The green SIG LED should be lit when

sound is being produced and the CLIP LED may light very briefly on the loudest transients (beats) of the

signal. If the red CLIP LED lights anything more than very briefly on each peak of the sound, the volume

needs to be reduced to avoid overload and distortion of the output.

For wireless connection from a smart phone, the input section has a Bluetooth on/off and pairing button (3).

Press this button to switch on the Bluetooth receiver, which will automatically connect to a previously paired

smart phone and allow playback through channel A of the monitor. A blue LED (5) will light to confirm this.

To pair a smartphone with the CM-series active monitor, press and hold the Bluetooth button (3), which will

cause the blue LED to flash, indicating pairing. Open the Bluetooth menu on the smart phone and search for a

Bluetooth ID corresponding to the model number (e.g. CM10A) of the wedge monitor. Select and accept to

pair to the CM monitor and the blue LED will stay lit constantly to confirm the pairing.

CM-series active monitors have an inbuilt DSP which has 5 optimal settings for different types of input or

audio program material: Normal / DJ / Voice / Live / Flat. Although quite self-explanatory, it is worth

experimenting with each profile to find the ideal EQ and tone response for each application. Simply turn the

DSP rotary selector (4) and the DSP setting indicator LEDs (1) show which setting is active.

Specifications

Model

Power supply (active)

Main driver

HF driver

Frequency response

Impedance (active / passive)

Power: rms

Power: max.

Sensitivity

DSP settings (active)

Dimensions

Weight (active / passive)

Disposal: The "Crossed Wheelie Bin" symbol on the product means that the product is classed as Electrical or

Electronic equipment and should not be disposed with other household or commercial waste

at the end of its useful life. The goods must be disposed of according to your local council guidelines.

Hereby, AVSL Group Ltd. declares that the radio equipment type 178.690UK is in compliance with

The full text of the EU declaration of conformity is available at the following internet address:

CM10/CM10A

230Vac, 50Hz (IEC)

250mmØ (10") coaxial

44mmØ (1.75") Ti compression driver

65Hz – 20kHz

4Ω / 8Ω

250W

500W

95dB

Normal, DJ, Voice, Live, Flat

355 x 350 x 275mm

9.87kg / 8.64kg

AVSL (EUROPE) Ltd, Unit 3D North Point House, North Point Business Park, New Mallow Road, Cork, Ireland.

CM12/CM12A

300mmØ (12") coaxial

55Hz – 20kHz

300W

600W

96dB

355 x 350 x 275mm

12.10kg / 10.50kg

Directive 2014/53/EU

http://www.avsl.com/assets/exportdoc/1/7/178690UK%20CE.pdf

AVSL Group Ltd. Unit 2-4 Bridgewater Park, Taylor Rd. Manchester. M41 7JQ

CM-series Stage Wedge Monitor User Manual

CM15/CM15A

380mmØ (15") coaxial

45Hz – 20kHz

350W

700W

97dB

15.00kg / 13.10kg