DFx Technology InnEnergy Buku Petunjuk - Halaman 11

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Beralih DFx Technology InnEnergy. DFx Technology InnEnergy 16 halaman.

'CLOSE' times must be set to 'OFF'. To do this, select the time that needs to be set

to off, e.g. 'OPEN 2', and press the > button (button 5). Next, press the <INC but-

ton (button 1) until 'OFF' is displayed on the right side of the screen. Finally, press

the SET> button (button 5) to confirm this change. All 'OPEN'/'CLOSE' times that

are not being used must be set to 'OFF'.

Opening and closing hours should be set in chronological order.

The table found in section 15.2 may be useful when programming trading hours

into the InnEnergy® device. An example of how the table may be used is also

shown.

Please Note: If your establishment's trading hours are likely to fluctuate slightly it

is advisable to adjust the trading times to accommodate this. However, this may

result in a reduction in energy savings.

Example:

The trading hours for the example table (found in section 15.1) are as shown. Note

how Thursday's trading hours have been written into the table.

Monday: 10am – 2pm

Tuesday: 11am – 2pm, 3pm – 6pm

Wednesday: 10am – 2pm

Thursday: 11am – 2am

Friday: 10am – 2pm

Saturday: 11am – 2pm, 3pm – 6pm, 7pm – 9pm, 10pm – 11pm

Sunday: 10am – 2pm

7.4 Electricity Cost (Unit £ / € / Cost per kWh)

The InnEnergy® device can display how much

money has been saved as a result of its installa-

tion once both the cost of electricity per kWh and

unit of currency have been set. In 'Engineer Mode'

press the MENU (button 2) until the 'Electricity

Cost' screen is displayed. To set the unit of cur-

rency: press the UNIT (button 3) until the currency

of choice is displayed. To set the cost of energy per

kWh: press the OK (button 3). The cost of electricity

should be entered in pence or cents, for example,

setting the cost as 10.05 would mean that each

kWh of electricity would cost 10.05 pence/cents.

Press the <INC button (button 1) to increment the

highlighted digit. To input the next digit press the

SET> button (button 5). Once all 4 digits have been

inputted, press the SET> button (button 5) to set

this cost of electricity per kWh and return to the