Avsl Adastra DM40 Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penguat Avsl Adastra DM40. Avsl Adastra DM40 9 halaman. Compact 100v mixer-amplifiers
Juga untuk Avsl Adastra DM40: Panduan Pengguna (9 halaman)

Halaman Cetak
Avsl Adastra DM40 Panduan Pengguna

Bluetooth Mode

"MP3A".
Select to pair with this device and once successful, wireless audio playback should be enabled
through the media player of the DM series amplifier. If this does not happen, check that there are
not more than 1 available devices with the ID "MP3A" and ensure that the volume is turned up on
the sending device.
Once paired, the smartphone or other device should connect automatically when in range of the DM
series amplifier and when Bluetooth is enabled.
FM tuner
Note: reception will be considerably better if an FM antenna is connected on the rear panel.
Press Play/Pause to initiate the auto-tune process, which will scan for the strongest frequencies and
store them automatically as P01, P02, P03... etc.
These stored stations can then be navigated using the Previous and Next navigation buttons.
The Program number will be displayed, followed shortly by the tuning frequency.
Before powering down, turn down the level controls. To avoid loud pops through the speakers.
Pressing the mode button until the display shows "bLUE" enters Bluetooth
receiver mode.
On a smart phone or other Bluetooth enabled device, scan for available
devices and the DM series amplifier will be represented with the Bluetooth ID
Pressing the mode button until "FM" appears in the lower part of the display
enters FM tuner mode.
The display will show the current radio frequency in MHz.
DM series mixer-amplifiers User Manual