DG NVMe-IP Instruksi - Halaman 6
Jelajahi secara online atau unduh pdf Instruksi untuk Motherboard DG NVMe-IP. DG NVMe-IP 18 halaman. Linux demo
Juga untuk DG NVMe-IP: Petunjuk Demo (20 halaman)
Halaman Cetakdg_nvmeip_linux_instruction_intel_en.doc
10) Check LED status on FPGA board. The description of LED is shown as follows.
GPIO LED
0
1
2
3
11) After programming completely, LED[0] and LED[1] are ON which mean that PCIe
initialization is processing. Then, LED[1] is OFF to show that PCIe completes initialization
process and system is ready to receive command from user.
Figure 2-8 LED status after program configuration file and PCIe initialization complete
19-Feb-18
Table 1 LED Definition
ON
Normal operation
System is busy
Error detect
Data verification fail
Figure 2-7 4-bit LED Status for user output
OFF
System is in reset condition
Idle status
Normal operation
Normal operation
Page 6