CPR AquaFuge 2 Panduan Memulai Cepat

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Akuarium CPR AquaFuge 2. CPR AquaFuge 2 2 halaman. Hang-on refugium

Halaman Cetak

The CPR AquaFuge

damaged or newly propagated corals, and much more without the risk of losing these items to

predators or other conditions in the main tank. The AquaFuge

tank and requires no supplemental plumbing. The specially designed baffles and outlet prevent

most substrates from being disturbed while allowing enough water flow to eliminate "dead" areas.

With the ability to culture a number of natural food items, the AquaFuge

carnivorous organisms in the main tank, and with the ability to grow various species of macro algae

in a controlled environment, the AquaFuge

algae in the main tank.

To place your AquaFuge

1. Open the packaging carefully and inspect the unit for damaged or missing parts. You should

have:

(1) Refugium body

(1) Tunze Comline 900 Powerhead

(1) Inlet assembly

If any items are damaged or missing, please contact your dealer immediately.

2. Do not use the interior brace to carry or move the refugium as this will weaken the structural

integrity of the unit. If your aquarium has an opening that is large enough for the powerhead to

slide in, then attach the powerhead to the refugium by inserting the outlet of the powerhead

into the opening of the inlet assembly. Some acrylic tanks have small openings, so you may have

to attach the powerhead to the refugium from inside the aquarium. Allow the AquaFuge

sit on the rim of the tank using the braces as support. The AquaFuge

sizes up to 2" wide. For narrower rims, tighten the black adjustment screws on the braces to

prevent the AquaFuge

3. Ensure that the AquaFuge

screws on the base of the refugium. Make sure that the powerhead is fully submerged in the

water.

4. Before placing the AquaFuge

substrate that you plan to use to minimize clouding of the water. Once the unit is part way filled

you may want to unplug the powerhead for a short time to allow fine sediment to settle.

5. Make sure that the powerhead is completely submerged and plug in the powerhead.

6. The Tunze powerhead included with your AquaFuge

blue impeller cover left or right to increase or decrease the flow to reach your desired flow rate.

7. The powerhead that feeds water to the refugium should be disassembled and cleaned at least

every 4 - 6 months to ensure optimal performance of the AquaFuge

See following page for instructions.

AquaFuge 2 Hang-on Refugium

2 refugium is designed to allow you to culture live food items, macro algae,

2 into operation:

2 from sliding forward or backward.

2 is parallel to the back of the aquarium by using the adjustment

2 into operation, it is recommended that you now add any

2 can actually help to reduce the growth of nuisance

2 has an adjustable flow rate. Rotate the

2 refugium simply hangs on the

2 will benefit the

2 can accommodate rim

2 to