Allied Telesis AR400 Series Panduan Pemasangan Cepat - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pemasangan Cepat untuk Router Jaringan Allied Telesis AR400 Series. Allied Telesis AR400 Series 8 halaman. How to set up pppoe between a linux client and access concentrator
Juga untuk Allied Telesis AR400 Series: Cara Mengkonfigurasi (6 halaman), Panduan Pemecahan Masalah (8 halaman), Pemecahan masalah (5 halaman), Panduan Pemasangan Cepat (12 halaman), Manual Informasi Keselamatan (18 halaman), Bagaimana-Cara (8 halaman)

Selecting a Site

The router should be installed on a level surface such as a desktop or bench.

When installing the router, choose a site that:

■

Allows adequate airflow around the router and its vents.

■

Is free of dust and moisture.

■

Will allow the router to operate within a temperature range of 0 to 40º C

(32 to 104º F) and a humidity range of 5 to 95% non-condensing.

■

Has a reliable and earthed (grounded), preferably dedicated and filtered

power supply circuit.

■

Does not expose cabling to sources of electrical noise, such as radios,

transmitters, broadband amplifiers, power lines, electric motors, and

fluorescent fixtures.

■

Allows easy access to the router's power and cable connections.

This equipment must be earthed.

Follow these steps to install the router:

Read the safety information.

For safety information, see the Safety and Statutory Information booklet. A

copy of this booklet is supplied with each router, and can also be found on

the Documentation and Tools CD-ROM or at www.alliedtelesyn.co.nz/

support/ar400.

Gather additional items you will need.

If also installing an optional Port Interface Card (PIC), you will need a PIC

Quick Install guide.

Unpack the router.

Verify the package contents. If any items are damaged or missing, contact

your sales representative.

Place the router in its operating location.

See the previous Selecting a Site section for guidelines on choosing a

suitable location.

Install expansion options.

If you purchased an optional PIC, install it now by following the PIC Quick

Install Guide. That guide can be found on the Documentation and Tools

CD-ROM or can be downloaded from www.alliedtelesyn.co.nz/support/

ar400/.

AR400 Series Router

C613-04032-01 REV C