Allied Telesis AR400 Series Bagaimana-Cara - Halaman 4

Jelajahi secara online atau unduh pdf Bagaimana-Cara untuk Router Jaringan Allied Telesis AR400 Series. Allied Telesis AR400 Series 8 halaman. How to set up pppoe between a linux client and access concentrator
Juga untuk Allied Telesis AR400 Series: Cara Mengkonfigurasi (6 halaman), Panduan Pemecahan Masalah (8 halaman), Pemecahan masalah (5 halaman), Panduan Pemasangan Cepat (8 halaman), Panduan Pemasangan Cepat (12 halaman), Manual Informasi Keselamatan (18 halaman)

Starting the Link

[root@linux_client michael]# pppd pty 'pppoe -I eth1'

Loading PPP modules for linux kernel 2.4:

[root@linux_client michael]# ping 192.168.0.254

PING 192.168.0.254 (192.168.0.254) from 192.168.0.1 : 56(84) bytes of

64 bytes from 192.168.0.254: icmp_seq=0 ttl=64 time=357 usec

64 bytes from 192.168.0.254: icmp_seq=1 ttl=64 time=266 usec

64 bytes from 192.168.0.254: icmp_seq=2 ttl=64 time=256 usec

--- 192.168.0.254 ping statistics ---

3 packets transmitted, 3 packets received, 0% packet loss

round-trip min/avg/max/mdev = 0.256/0.293/0.357/0.045 ms

pppoe is actually another PPP daemon and we tell it to start pppoe discovery out eth1. The "pty"

part makes pppd converse via a pseudo terminal, otherwise all the PPP output goes to the screen

and hence the link will not come up.

Set Up PPPoE Between a Linux Client and an Allied Telesis Access Concentrator

To configure your linux device, start the pppd (PPP daemon) process and tell it to start

pppoe

data.

[

]