2Wire Gateway 100 Series Panduan Instalasi - Halaman 13
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Gerbang 2Wire Gateway 100 Series. 2Wire Gateway 100 Series 19 halaman. Usb driver installation for macintosh computers
Juga untuk 2Wire Gateway 100 Series: Instalasi Driver (1 halaman)
Halaman CetakAppendix C: Installing the Gateway on Other Operating Systems
Follow these instructions if you are using an operating system that is not supported by the Setup Wizard CD
(such as any Macintosh OS prior to 10.2, UNIX, or Linux).
Connect your first computer to the gateway
There are many ways to set up your network, but typically the first computer is located in the same room as
the gateway and your broadband connection. Ethernet is the preferred connection method for your first
computer, although instructions for connecting via USB are also provided.
To begin your gateway installation:
Remove the gateway, power adapter, and cables from the gateway box.
1.
Connect the provided power adapter from the gateway's
2.
Connect the provided Ethernet cable from the broadband modem to the
3.
the gateway.
Proceed to the Ethernet or USB connection instructions that begin on the following pages.
Gateway Installation and Support Guide
port to an electrical outlet.
POWER
BROADBAND MODEM
port on
11