2Wire Gateway 100 Series Panduan Instalasi - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Gerbang 2Wire Gateway 100 Series. 2Wire Gateway 100 Series 19 halaman. Usb driver installation for macintosh computers
Juga untuk 2Wire Gateway 100 Series: Instalasi Driver (1 halaman)

Halaman Cetak
Gateway Installation and Support Guide
Running the 2Wire Setup Wizard Manually
If after one minute the gateway Setup Wizard does not automatically run:
Windows Users:
Mac Users:
Verifying That Your PC Adapter Driver is Installed Correctly
There are two common errors that may occur during installation that will result in an error message:
•
The appropriate adapter driver software was not installed.
•
The adapter driver software was only partially installed or is incompatible with your system.
Follow the procedure appropriate to your system to determine whether the driver was correctly installed.
Windows XP:
Windows 2000:
Windows 98 SE or Windows ME:
4
Double-click the
My Computer
Double-click the icon that corresponds to your CD-ROM drive.
Double-click
and follow the on-screen instructions.
Setup.exe
Double-click the
icon.
2Wire
Double-click the
2Wire Setup Wizard
1. Click
and click Control Panel.
Start
2. Double-click the
System
3. Select the
tab, then click
Hardware
Continue to step 4 under Accessing Driver Status on page 5.
1. Click
Start >Settings
2. Double-click the
System
3. Select the
Hardware
Continue to Step 4 under Accessing Driver Status on page 5.
1. Click
Start >Settings
2. Click the
icon.
System
3. Select the
Device Manager
Continue to Step 4 under Accessing Driver Status on page 5.
icon located on the desktop.
icon.
icon.
Device Manager
and click
.
Control Panel
icon.
tab and click
Device Manager
and click
.
Control Panel
tab.
.
.