CPS CP-390 Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Transceiver CPS CP-390. CPS CP-390 20 halaman.

4.1 Basic Button Operations

Button

PTT Button

Power ON/OFF

Volume Switch

Up/Down Button

Zone Button

Menu/OK Button

Cancel/Return Button

Emergency

Flash Lamp Button

Figure 3-3) LCD Indication of CP390 Series Radio

Pressing PTT button, the radio mode is transmission and releasing the

button, it is receiving mode.

It is recommended to talk 5~10cm away from the microphone for the

best voice communication.

Turning the volume switch knob clockwise to power on and turning the

knob counterclockwise to power off. And when set an audio volume

level, please refer with the index on the side of the volume knob.

You can change the settings of the Channel that have been set.

You can enter 32 Channel per the call zone (Zone).

In the progress of the menu, you can move the menu item.

You can change the order of the call zone that you set.

The button to enter the menu. When you enter the menu, you can

make a choice of each item.

Using the Button, it will return to the menu on the one stage.

In the menu setting screen, and run the cancellation of the function.

If you press the button shortly, it will operate with the function set by

the CPS program, and the default value is set to Emergency. . Press

the button long, it is to activate the flash lamp on / off button.

Operation Description