Allied Telesis AT-FS202 Series Lembar data
Jelajahi secara online atau unduh pdf Lembar data untuk Router Jaringan Allied Telesis AT-FS202 Series. Allied Telesis AT-FS202 Series 2 halaman. Fs200 series 2 port fast ethernet speed/media converting switch
Juga untuk Allied Telesis AT-FS202 Series: Lembar data (2 halaman), Lembar data (2 halaman)
Halaman Cetak
Datasheet |
Switches
FS200 Series
2 Port Fast Ethernet Speed/Media Converting Switch
AT -FS201-xx
2 port Fast Ethernet switch,
10/100TX to 100FX (ST), 2km
AT -FS202-xx
2 port Fast Ethernet switch,
10/100TX to 100FX (SC), 2km
AT -FS232-xx
2 port Fast Ethernet switch media converter
10/100TX to 100FX (SC), 2km
AT -FS232/1-xx
2 port Fast Ethernet switch media converter
10/100TX to 100FX (SC), 15km
AT -FS232/2-xx
2 port Fast Ethernet switch media converter
10/100TX to 100FX (SC), 40km
Extend Networks
The FS200 series switches are the ideal solution
when the time comes to upgrade your
traditional 10Mbps Ethernet network or extend
your 100Mbps Fast Ethernet network.The
FS200 series is designed to extend the distance
of your network by converting Fast Ethernet
data between twisted pair cabling and single-
mode fiber-optic cabling.The AT-FS200 features
a 100FX fiber-port and a 10/100TX twisted-pair
port.The fiber-optic port features an SC
connector and an operating distance of 2
kilometers (6,561 feet) to 40 kilometers (24.9
miles) depending on the model.The twisted-pair
port has an RJ-45 connector with a maximum
operating distance of 100 meters (328 feet).
VLAN Support
Many new backbone switch products now
support the industry standard IEEE 802.1Q
specification for Virtual LANs (VLANs) that
send extra-long data packets on the
network.The FS200 switches are fully
compatible with these long packets, enabling
them to be used in modern networks. Switches
not supporting this feature will discard these
extra long packets, making them unsuitable for
modern networks.
Allied Telesis
Small and Flexible
The small size and external power supply of the
FS200 series allows them to be used almost
anywhere. Additionally, they can be mounted in
a chassis along with Allied Telesis' media
converters, allowing users to construct any mix
of network conversions when they add the
optional redundant power supply.
MissingLink
TM
and Smart
MissingLink
TM
(SML)
The MissingLink
TM
feature allows the ports on
the media converter to pass the Link status of
their connections to each other. When the
media converter detects a problem with a port
- such as the loss of connection to a node - it
shuts down the connection to the other port,
thereby notifying the node that the connection
has been lost.The Smart MissingLink™ (SML)
feature monitors network connections and
provides notification when network segments
fails, allowing network managers to quickly
identify the source and location of failed
segments and minimize downtime.
Key Features
•
Convert speed as well as media type
•
Auto MDI/MDI-X
•
MissingLink
TM
(ML) (AT-FS232 only)
•
Smart MissingLink
TM
(SML) (AT-FS232 only)
•
Supports 1532 bytes frame
•
Support for multi-mode and single-mode fiber
•
Supports half and full-duplex operation
•
2k MAC address tables
•
Store-and-forward switching mode
•
Transparent to IEEE 802.1Q packets
•
Standalone or rack-mountable
•
Rack-mountable using optional AT-MCR12,
AT-TRAY4, or AT-TRAY1 chassis
•
Wall-mountable using AT-WLMT
www.alliedtelesis.com