Allied Telesis Rapier Series Bagaimana-Cara - Halaman 5
Jelajahi secara online atau unduh pdf Bagaimana-Cara untuk Router Jaringan Allied Telesis Rapier Series. Allied Telesis Rapier Series 8 halaman. How to set up pppoe between a linux client and access concentrator
Juga untuk Allied Telesis Rapier Series: Panduan Pemecahan Masalah (8 halaman), Pemecahan masalah (5 halaman), Catatan Rilis (8 halaman), Cara Mengkonfigurasi (9 halaman)
Halaman Cetak
Debugging and Verifying
Apart from PING, you can also check the following on your linux PC:
[root@linux_client michael]# ifconfig
ppp0 Link encap:Point-to-Point Protocol
[root@linux_client michael]# ps ax | grep ppp
4747 ?
4748 ?
4769 pts/0
[root@linux_client michael]# pppstats
IN
310
On your Allied Telesis device, you can check the following:
ena ppp templ=1 debug=decode
ena ppp templ=1 debug=all
show ppp
show ppp pppoe
Set Up PPPoE Between a Linux Client and an Allied Telesis Access Concentrator
inet addr:192.168.0.1
UP POINTOPOINT RUNNING NOARP MULTICAST
RX packets:7 errors:0 dropped:0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisions:0
S
S
R
PACK VJCOMP
VJUNC
7
0
P-t-P:192.168.0.254
0:00 /usr/sbin/pppd pty pppoe -I eth1
0:00 pppoe -I eth1
0:00 grep ppp
VJERR
|
0
0
|
Mask:255.255.255.255
MTU:1492
Metric:1
OUT
PACK VJCOMP
322
8
0
VJUNC NON-VJ
0
8
5