Allied Telesis Routers and Switches Lembar data - Halaman 7
Jelajahi secara online atau unduh pdf Lembar data untuk Router Jaringan Allied Telesis Routers and Switches. Allied Telesis Routers and Switches 15 halaman. Allied telesis router and switch data sheet
Halaman Cetak
Configure Load Balancer 2
Load balancer 2 is identical to load balancer 1, except for its:
•
name (which is just a convenience and does not affect how it functions)
•
public interface's IP address
•
private interface's IP address
•
load balancer redundancy peer, which is load balancer 1
Because the two load balancers are so similar, the following instructions do not explain the
steps—see the instructions for load balancer 1 for explanations.
1. Name the router
2. Create the VLANs
3. Add ports to the VLANs
4. Configure IP on the VLANs
5. Configure the firewall
Configure Load Balancer Redundancy on Allied Telesis Routers and Switches
set system name=LB-2
create vlan=vlan2 vid=2
create vlan=vlan3 vid=3
create vlan=vlan4 vid=4
add vlan=2 port=1
add vlan=3 port=2-4
add vlan=4 port=5
enable ip
add ip int=vlan2 ip=172.214.1.4 mask=255.255.255.0
add ip int=vlan3 ip=192.168.1.201
add ip int=vlan4 ip=192.168.2.1
enable firewall
create firewall policy=lb
set firewall policy=lb tcptimeout=5 udptimeout=5 othertimeout=5
add firewall policy=lb int=vlan2 type=public
add firewall policy=lb int=vlan3 type=private
add firewall policy=lb int=vlan4 type=private
7