Avtech AVT1301 Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kamera Keamanan Avtech AVT1301. Avtech AVT1301 7 halaman. Hd cctv total solution

Halaman Cetak

SPECIAL

PRIVACY

ZONE

MOTION*

HLC

EFFECT

COLOR GAIN

COLOR HUE

SHARPNESS

CONTRAST

BRIGHT OFF.

MIRROR

FLIP

* The function here is for this camera only, and the detection log will be not noted in the DVR.

DESCRIPTION

AREA SEL.

Select AREA1 or AREA2 to show a predefined area for masking. To

move and change the area, please go to SX / EX / SY / EY.

MASK PAT.

Select the color to mask: black / gray / white. Select OFF to disable

area masking.

Extend / narrow the current area from the left side.

Extend / narrow the current area from the right side.

Extend / narrow the current area from the top.

Extend / narrow the current area from the bottom.

MOTION

Enable (ON) / disable (OFF) motion detection.

SENSITI.

Set the sensitivity to trigger motion detection. The higher the value,

the more sensitive the camera to trigger motion detection.

Choose the way to show motion detection is triggered: TRACE to

ALARM

frame the area in red which motion trigger occurs on the screen, or

ICON to simply show a running man icon for motion trigger

occurrences.

HOLD TIME

Set how long the alarm lasts in second from 1 to 10.

HLC

HLC (high light compensation) is used to suppress strong backlight

for clearer images. A grey mask will be covered on the source of

the strong light.

Choose ON and click  (ENTER) to select the areas for this

function.

The screen will be divided into 16 areas. Move to the area you

want, and click  (ENTER) to make X to O.

MASK VALUE

Set the darkness of the mask.

The more the value, the lighter the grey you'll get. The less the

value, the darker the grey you'll get.

THRESHOLD

Set the level of light source which enables masking.

The more the value, the stronger the light source will trigger HLC;

the less the value, the lighter the light source will trigger HLC.

0 ~ 255

Set the level of color saturation.

The more the value, the more saturated the color will be, but the

more noise the image will get.

0 ~ 71

Set the level of hue.

0 ~ 255

Set the level of sharpness to enhance the clarity of image detail by

adjusting the aperture and sharpening the edges.

The more the value, the sharper the image will be.

0 ~ 255

Set the level of contrast.

The more the value, the more the contrast level of the image will be.

-128 ~ 127

Set the level to compensate the brightness of the image if needed.

The more the value, the brighter the image will be.

OFF / ON

Enable to turn the images horizontally based on your installation

situation when necessary.

OFF / ON

Enable to flip the image 180° when necessary.