Avtech AVT420A Panduan Pengguna - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kamera Keamanan Avtech AVT420A. Avtech AVT420A 8 halaman. Hd cctv total solution
Juga untuk Avtech AVT420A: Panduan Pengguna (6 halaman)
Halaman CetakCAMERA GUARD
This function is used to lock the camera to a fixed point and no pan action could be made until the lock mode
is disabled. Before using this function, make sure:
You have an iOS or android mobile device with our free app, EagleEyes, installed.
Your HD CCTV DVR is connected to Internet, and registered in the address book of EagleEyes.
NOTE: To know how to connect the DVR to Internet, please refer to its user manual.
Step1: In the live view, and right click to show the main menu.
Select "ADVANCED CONFIG" "DCCS". Then, select the channel which connects this camera,
and click "SETUP" to enter the menu of camera parameters.
CAMERA
DETECTION
ALERT
NETWORK
DISPLAY
RECORD
DCCS
NOTIFY
MULTICASTING
EXIT
Step2: Select "CAMERA GUARD", and enable this lock function. Then, configure the timeout after which
the camera will be fixed to the current point and any attempt to pan the camera to another point
will be failed.
GUARD LOCK
TIMEOUT (SECS)
Step3: Go to EagleEyes on your mobile phone or tablet, and access your HD CCTV DVR. Then, click on
the channel with this camera connected, and choose any of the following methods to move the
camera to the point you want:
ADVANCED CONFIG
CH1
CH2
CH3
MENU
SETUP
DEVICE
AVT503S
CONNECTION
OK
CAMERA GUARD
CH4
ON
30