DGSHAPE VL-300 Panduan Pengguna - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Medis DGSHAPE VL-300. DGSHAPE VL-300 16 halaman.
Halaman Cetak
Getting Started
Conditions for Material When Imprinting Curved Surfaces
The table and figure below show the recommended imprint area with respect to the diameter of the cylinder
formed from an extended curved surface. Note, however, that the following conditions are assumed.
Material with an extended curved surface has circularity.
Diameter of cylinder with
extended curved surface (ø)
10 mm (0.394 in.)
20 mm (0.79 in.)
30 mm (1.19 in.)
4
Recommended imprint area (A)
2.0 mm (0.078 in.)
2.8 mm (0.11 in.)
3.4 mm (0.133 in.)