Dell Alienware M11x Panduan Servis - Halaman 31

Jelajahi secara online atau unduh pdf Panduan Servis untuk Laptop Dell Alienware M11x. Dell Alienware M11x 40 halaman. Service manual

Halaman Cetak
1
status light board cable connector
3
screws (4)
 
10. Using a plastic scribe carefully pry out the palm rest assembly along the rear edge and then ease the palm rest assembly from the computer base.
 
11. Hold the palm rest assembly perpendicular to the computer base and disconnect the Alienware logo light cable from the connector on the status light
board.
1
Alienware logo light cable
 
CAUTION:
Carefully separate the palm rest assembly from the computer base to avoid damage to the palm rest assembly.
 
12. Lift the palm rest assembly off the computer base.
 Replacing the Palm Rest Assembly
 
1. Follow the instructions in
Before You
 
2. Connect the Alienware logo light cable to the connector on the status light board.
 
3. Align the palm rest assembly on the computer base and gently snap the palm rest assembly into place.
 
4. Replace the four screws that secure the palm rest assembly to the computer base.
 
5. Connect the touch pad cable and status light board cable to their connectors on the system board and, press down on the locking tabs to secure the
cables.
 
2
touch pad cable connector
Begin.