Dell C600 - Latitude Intel P-4 1.4GHz Panduan Servis - Halaman 37

Jelajahi secara online atau unduh pdf Panduan Servis untuk Laptop Dell C600 - Latitude Intel P-4 1.4GHz. Dell C600 - Latitude Intel P-4 1.4GHz 46 halaman. Latitude c600/c500 series
Juga untuk Dell C600 - Latitude Intel P-4 1.4GHz: Panduan Servis (48 halaman)

Halaman Cetak

Dell C600 - Latitude Intel P-4 1.4GHz Panduan Servis

Removing and Replacing Parts : Dell Latitude C600/C500 Series Service Manual

NOTICE:

When removing the microprocessor module, pull the module straight up. Be careful not to bend the pins on

the microprocessor module.

4. Remove the microprocessor module.

NOTICE:

To avoid damage to the microprocessor, hold the screwdriver so that it is perpendicular to the

microprocessor when removing the cam screw (see

a. Use a small flat-head screwdriver and rotate the ZIF socket cam screw counter-clockwise 180 degrees to loosen

the ZIF socket.

The ZIF socket cam screw secures the microprocessor assembly to the system board assembly. Take note of the

arrow on the ZIF socket cam screw (see

NOTE:

Your system has a type I or type II ZIF

socket.

b. Use a microprocessor extraction tool to remove the microprocessor module.

Replacing the Microprocessor Module

NOTICE:

Seating the microprocessor module properly in the ZIF socket does not require

force.

NOTICE:

A microprocessor module that is not properly seated can result in an intermittent connection, or permanent

damage to the microprocessor and ZIF socket.

1. Align the pin-1 corner of the microprocessor module with the pin-1 corner of the microprocessor socket on the system

board and insert the microprocessor module.

NOTICE:

You must position the microprocessor module correctly in the ZIF socket to avoid permanent damage to the

module and the socket.

When the microprocessor module is correctly seated, all four corners are aligned to the same height. If one or more

corners of the module are higher than the others, the module is not seated correctly.

NOTICE:

Hold the microprocessor down while turning the cam screw to prevent intermittent contact between the cam

screw and microprocessor (see

2. Tighten the ZIF socket by turning the cam screw clockwise to secure the microprocessor module to the system board

assembly.

3. Update the BIOS using a flash BIOS update program diskette or CD.

NOTE:

For instructions to update or flash the BIOS, see the Dell Portable Computer BIOS Update

Guide.

Reserve Battery

file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/L...600/C500%20C600%20Service%20Manual/remove.htm (28 of 36)6/21/2004 1:22:14 AM

"Microprocessor

Modules").