Dell E6400 - Latitude - Core 2 Duo 2.53 GHz Panduan Cara - Halaman 16

Jelajahi secara online atau unduh pdf Panduan Cara untuk Laptop Dell E6400 - Latitude - Core 2 Duo 2.53 GHz. Dell E6400 - Latitude - Core 2 Duo 2.53 GHz 46 halaman. Latitude ultrabook series; e-family series; mobile precision series
Juga untuk Dell E6400 - Latitude - Core 2 Duo 2.53 GHz: Panduan Cara (38 halaman), Panduan Peninjau (50 halaman), Informasi Pengaturan dan Fitur (8 halaman), Panduan Cara (32 halaman), Panduan Cara (34 halaman), Panduan Cara (46 halaman), Manual (46 halaman)

Dell E6400 - Latitude - Core 2 Duo 2.53 GHz Panduan Cara
Dell Latitude Ultrabook, E-Family & Mobile Precision Reimage "How-To" Guide
Latitude E-Family & Mobile Precision is required to be installed on Operating Systems in AHCI,
IRRT, RAID On, and RAID SATA modes.
The Intel IMSM or IRST application must also be installed
The SATA operation modes are configured in the BIOS. Refer to the BIOS section 2.5
If the SATA mode is configured in AHCI, IRRT, RAID On, or RAID mode, the IMSM / IRST driver
must be installed during the initial Operating System installation stages. The IMSM / IRST driver
is only available from Dell
If SATA configuration mode in the BIOS is set to either AHCI, IRRT, RAID On, or RAID, install the
Dell IMSM / IRST driver and application available on Dell's driver & downloads support web site
(dell.com/support) under the "Serial ATA" section
Follow these steps to install the IMSM / IRST driver:
3. For Microsoft XP 32 & 64-Bit Operating Systems:
4. For Microsoft Vista / Windows 7 /Windows 8.1/Win10(32 & 64-Bit) Operating
Systems:
Installing the Intel IMSM driver using the Floppy Drive
Boot to the Dell Recovery DVD (RDVD) and select the Create RAID
driver from the list of items. You will need Floppy Disk Drive and a
diskette for this selection. The IMSM / IRST driver must be on the root
of the A:\
Note
: the latest IMSM / IRST driver can also be obtained from
dell.com/support
under the "SATA Drivers" section
Once the driver is extracted and stored on the target diskette, boot to
the operating system CD and start the installation
In the initial stage of Windows Setup, press <F6> to install the third-
party IMSM SCSI or RAID drivers
When prompted, insert the floppy disk containing the IMSM driver and
follow the instructions provided by Windows Setup
After reading the floppy disk, either choose "Intel(R) ICH9M-E/M SATA
AHCI Controller" if in AHCI mode or "Intel(R) ICH8M-E/ICH9M-eSATA
RAID Controller" if in IRRT mode – select the appropriate driver to
install
Installing the Intel IMSM / IRST driver after the installation of the
Operating System
Boot to the Operating System DVD or Boot from PXE , then start the OS
installation
After completing the OS installation, insert the Dell RDVD
Select the IMSM / IRST driver and follow the installation procedure