Dell Inspiron 1210 Panduan Servis - Halaman 38
Jelajahi secara online atau unduh pdf Panduan Servis untuk Laptop Dell Inspiron 1210. Dell Inspiron 1210 39 halaman. Service manual
Juga untuk Dell Inspiron 1210: Panduan Memulai Cepat (19 halaman)
Back to Contents Page
Replacing the CRT Board
Dell™ Inspiron™ 1210 Service Manual
CAUTION:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as a connector on the back of the computer).
1. Follow the instructions in
Before You
2. Remove the palm rest. See
1
CRT board
2
3. Remove the M2.5x3-mm screw that secure the CRT board to the base of the computer.
4. Lift the CRT board up and out from the base of the computer.
5. To replace the CRT board, align the holes on the CRT board to the protrusions on the base of the computer.
6. Replace the CRT M2.5x3-mm screw to secure the CRT board to the base of the computer.
7. Replace the palm rest. See
8. Slide the battery into the battery bay, until it clicks in place and slide the battery-lock latch towards the lock position.
Back to Contents Page
Begin.
Replacing the Palm
Rest.
M2.5x3-mm screw
Replacing the Palm
Rest.