Dell Inspiron 1440 Panduan Servis - Halaman 13
Jelajahi secara online atau unduh pdf Panduan Servis untuk Laptop Dell Inspiron 1440. Dell Inspiron 1440 48 halaman.
Juga untuk Dell Inspiron 1440: Panduan Servis (48 halaman)
Halaman Cetak
Back to Contents Page
Processor Module
Dell™ Inspiron™ 1440 Service Manual
Removing the Processor Module
Replacing the Processor Module
WARNING:
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
surface (such as the back panel) on the computer.
CAUTION:
to apply slight pressure to the center of the processor while turning the cam screw.
CAUTION:
CAUTION:
is not covered by your warranty.
CAUTION:
computer.
Removing the Processor Module
1. Follow the procedures in
2. Remove the processor heat sink (see
3. To loosen the ZIF socket, use a small, flat-blade screwdriver and rotate the ZIF-socket cam screw counterclockwise until it comes to the cam stop.
1
ZIF socket
CAUTION:
oils in your skin can reduce the heat transfer capability of the thermal pads.
CAUTION:
4. Lift the processor module from the ZIF socket.
Replacing the Processor Module
Great user manuals database on
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
To prevent intermittent contact between the ZIF-socket cam screw and the processor when removing or replacing the processor, press
To avoid damage to the processor, hold the screwdriver so that it is perpendicular to the processor when turning the cam screw.
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
To help prevent damage to the system board, remove the main battery (see
Before You
Begin.
Removing the Processor Heat
2
ZIF-socket cam screw
To ensure maximum cooling for the processor, do not touch the heat transfer areas on the processor thermal-cooling assembly. The
When removing the processor module, pull the module straight up. Be careful not to bend the pins on the processor module.
UserManuals.info
Removing the
Battery) before working inside the
Sink).