Dell Inspiron 2100 Panduan Servis - Halaman 30

Jelajahi secara online atau unduh pdf Panduan Servis untuk Laptop Dell Inspiron 2100. Dell Inspiron 2100 38 halaman. Vga card installation instructions
Juga untuk Dell Inspiron 2100: Mulai di sini (2 halaman), Informasi Pengaturan dan Fitur (8 halaman), Panduan Referensi Cepat (17 halaman), Spesifikasi (2 halaman), Panduan Referensi Sistem (45 halaman), Petunjuk Instalasi (1 halaman)

Halaman Cetak
Dell Inspiron 2100 Panduan Servis
Back to Contents Page
System Board
Dell™ Latitude™ 2100 Service Manual
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

Removing the System Board

  
NOTE:
You may need to install Adobe Flash Player from Adobe.com in order to view the illustrations below.
1. Follow the procedures in
Before Working Inside Your
2. Remove the
battery
from the computer.
3. Remove the
keyboard
from the computer.
4. Remove the
access panel
from the computer.
5. Remove the
display assembly
6. Open the clip that secures the touch pad cable to the system board.
7. Disconnect the touch pad cable from the system board.
8. Open the clip that secures the button board data cable to the system board.
9. Disconnect the button board data cable from the system board.
10. Turn over the computer.
11. Remove the six screws that secure the system board to the computer chassis.
12. Identify the side of the system board with USB ports attached, then lift that side of the system board from the chassis. Next, remove the system board
from the chassis and set it aside on a flat, clean surface.
Computer.
from the computer.