Avtech KPD604 Panduan Cepat - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Cepat untuk DVR Avtech KPD604. Avtech KPD604 15 halaman. 16ch mpeg-4 dvr
Halaman Cetak
3.3 Power Setup
This device should be operated only with the type of power source indicated on the manufacturer's label. Connect
the indicated AC power cord to the power adapter, and plug into an electrical outlet. Power LED "
It takes approximately 10 to 15 seconds to boot the system.
3.4 Date and Time Setting
Before operating your DVR, please set the date and time on your DVR first.
Press
(menu) button and enter the password to go to the quick-start menu list. The default admin password is
0000. Move the cursor to the icon
CHANNEL TITLE
EVENT STATUS
IMAGE SIZE
QUALITY
IMAGE PER SECOND
RECORD TIMER
DETECTION TIMER
DATE
FORMAT
DAYLIGHT SAVING
ADVANCE
SELECT
3.5 Password Setting
Press
(menu) button and enter the password to go to the quick-start menu list. And then move the cursor to
"ADVANCE" to enter the advanced setting menu.
In the "ADVANCE" menu, move the cursor to "
(enter) button to enter the submenu to set the password (four digits). The default admin password is 0000.
SERIAL TYPE
BAUD RATE
HOST ID
PASSWORD
RESET DEFAULT
CLEAR HDD
UPGRADE
AUTO KEYLOCK (SEC)
LANGUAGE
VIDEO FORMAT
VERSION
PLEASE CONSULT YOUR INSTALLER FOR ADVANCE SETTINGS
SELECT
BACK
and you can set the date / time / daylight saving in this menu list.
QUICK START
BACK
NEXT
SYSTEM INFO
RS485
2400
0
XXXX
RESET
HDD-MASTER-1
START
30
ENGLISH
NTSC
1049-1007-1011-1001-L6-6C1B
NEXT
ENTER
ON
ON
CIF
BEST
120
OFF
OFF
2007 / AUG / 08
21 : 30 : 00
Y / M / D
OFF
ENTER
SYSTEM INFO ". Select "PASSWORD" and press
-8-
" will be on as blue.