ensol ES1V2.0 Instruksi Instalasi - Halaman 9

Jelajahi secara online atau unduh pdf Instruksi Instalasi untuk Inverter ensol ES1V2.0. ensol ES1V2.0 20 halaman. Flat solar collectors

4.1.5 montage of the collector clampings

Collector clamping

4.2

Installation of the connection system - hydraulic connection of the collector

4.2.1. Hydraulic connection of the harp collectors ES1V/2.0 and ES1V/2.65

Directions!

Hydraulic conduits and fixtures can be connected at the left or right side of

the collector battery. The instruction presents the connection at the right side,

as an example.

One-sided connection of maximum 5 collectors.

When forming a battery you can connect maximum 5 collectors.

Installation instruction

of the flat solar collectors models ES1V2.0, ES1V2.65,

ES2V/2.0 AL, ES2V/2.65

integrated in the slate roof.

elbow

Expansion joint

Fix the left collector at the upper and lower

left side by the help of the collector clamping

(40 x 40mm) and wood screws (5 x 40mm).

Afterwards place the right collector. Set both

linear collector clamping bars (114 x 30mm)

between the collectors, push the collectors

together and screw the clamping bars down

by wood screws (5 x 40mm). Fix the right

collector also at the upper and lower side by

the help of collector clamping (40 x 40mm)

and wood screws (5 x 40mm).

cross-fitting