Dell Precision 5540 Panduan Servis - Halaman 27
Jelajahi secara online atau unduh pdf Panduan Servis untuk Laptop Dell Precision 5540. Dell Precision 5540 48 halaman.
Juga untuk Dell Precision 5540: Panduan Servis (48 halaman), Buku Panduan Teknis (19 halaman), Buku Panduan Teknis (48 halaman), Pengaturan dan Spesifikasi (30 halaman), Manual Sambungan Layar Eksternal (11 halaman)
Halaman Cetak
c) Lift the DC-in connector from the computer [3].
Installing the DC-in Adapter Port
1. Place the DC-in adapter port into the slot on the palm-rest assembly.
2. Route the power-adapter port cable through its routing guides on the palm-rest assembly.
3. Replace the M2x3 screw that secures the power-adapter port to the palm-rest assembly.
4. Connect the power-adapter port cable to the system board.
5. Install the:
a)
Battery
b)
Base cover
6. Follow the procedures in
Placa base
Removing the System Board
1. Follow the procedures in
2. Remove the:
a)
base cover
b)
battery
c)
fans
d)
heatsink assembly
e)
WLAN
f)
hard drive (optional)
g)
keyboard
h)
SSD
i)
memory modules
NOTE:
Your computer's Service Tag is located under the system badge flap. You must enter the Service Tag in the
BIOS after you replace the system board.
NOTE:
Before disconnecting the cables from the system board, note the location of the connectors so that you can
re-connect them correctly after you replace the system board.
3. To remove the system board:
a) Lift the latch and disconnect the touchpad cable [1].
b) Lift the latch and disconnect the keyboard controller board cable [2].
c) Disconnect the power connector port cable from the system board [3].
After Working Inside Your
Computer.
Before Working Inside Your
Computer.
Disassembly and reassembly
27