Dell Precision 5750 Manual Pengaturan dan Spesifikasi - Halaman 30
Jelajahi secara online atau unduh pdf Manual Pengaturan dan Spesifikasi untuk Laptop Dell Precision 5750. Dell Precision 5750 36 halaman.
Juga untuk Dell Precision 5750: Manual Sambungan Layar Eksternal (13 halaman)
Halaman Cetak
Table 36. System setup options—Security menu (continued)
Security
SHA-256
Clear
TPM State
Intel Software Guard Extensions
Intel SGX
SMM Security Mitigation
SMM Security Mitigation
Data Wipe on Next Boot
Start Data Wipe
Absolute
Absolute
UEFI Boot Path Security
UEFI Boot Path Security
Table 37. System setup options—Passwords menu
Passwords
Admin Password
Password Configuration
Upper Case Letter
Upper Case Letter
30
System setup
Default: ON
Enables or disables the BIOS and the TPM to use the SHA-256 hash algorithm
to extend measurements into the TPM PCRs during BIOS boot.
Default: ON
Enables or disables the computer to clear the PTT owner information, and
returns the PTT to the default state.
Default: OFF
Enables or disables the TPM. This is the normal operating state for the TPM
when you want to use its complete array of capabilities.
Default: Enabled
Enables or disables the Intel Software Guard Extensions (SGX) to provide a
secured environment for running code/storing sensitive information.
By default, Software Control is selected.
Enables or disables additional UEFI SMM Security Mitigation protections.
Default: OFF
NOTE:
This feature may cause compatibility issues or loss of functionality
with some legacy tools and applications.
When enabled, the BIOS will queue up a data wipe cycle for storage device(s)
connected to the motherboard on the next reboot.
Default: OFF
Enables, disables or permanently disable the BIOS module interface of the
optional Absolute Persistence Module service from Absolute Software.
By default, Enable Absolute is selected.
Controls whether the system will prompt the user to enter the admin password
(if set) when booting to a UEFI boot path device from the F12 boot menu.
By default, Always Except Internal HDD is selected.
Sets, changes, or deletes the administrator password (sometimes called the
"setup password"). The administrator password enables several security
features.
When enabled, password must contain at least one upper case letter.
Default: OFF
When enabled, password must contain at least one lower case letter.
Default: OFF