ensol ES2V/2.0 AL Instruksi Instalasi - Halaman 18

Jelajahi secara online atau unduh pdf Instruksi Instalasi untuk Inverter ensol ES2V/2.0 AL. ensol ES2V/2.0 AL 20 halaman. Flat solar collectors

4.4.10 montage of the left top edge flashing

Clip in the left top edge at the wind protection rail and fix

it at the wood wedge with two wood screws (4 x 30mm),

as shown on the small pictures. This has to be done

outside of the seam!

Fix the upper edge at the wood wedge by the help of a

coloured and sealed screw (4,5 x 35mm).

4.4.11 montage of the top edge flashing

4.4.12 montage of the right top edge flashing

Installation instruction

of the flat solar collectors models ES1V2.0, ES1V2.65,

ES2V/2.0 AL, ES2V/2.65

integrated in the slate roof.

Push together

flashing and the left top edge (approx.

40mm) and fix them outside the seam

with two wood screws (4 x 30mm).

Wood screw 4 x 30mm

Sheet strips

Wood screw 4 x 30mm

The distance between the

flashing and the wind

protection rail should be

5mm!

the top

extension

Fix the right upper edge at the wood wedge by the

help of a coloured and sealed screw (4,5 x 35mm).

Afterwards hook in four sheet strips along the upper

flashing and affix them with wood screws (4,5 x

35mm).

Stick the seal strip (20 x 20mm) across the total

width.

Coloured and sealed screw