Dell Studio 1458 Panduan Servis - Halaman 11
Jelajahi secara online atau unduh pdf Panduan Servis untuk Laptop Dell Studio 1458. Dell Studio 1458 48 halaman.
Juga untuk Dell Studio 1458: Panduan Servis (48 halaman)
Back to Contents Page
Camera Module
Removing the Camera Module
Replacing the Camera Module
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION:
To help prevent damage to the system board, remove the main battery (see
computer.
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
Removing the Camera Module
1. Follow the instructions in
Before You
2. Remove the system board (see
3. Remove the WWAN module (see
4. Remove the display assembly (see
5. Remove the display bezel (see
6. Remove the display panel (see
7. Disconnect the camera module cable from the camera module cable connector.
8. Remove the two screws securing the camera module to the display cover.
1
screws (2)
3
camera module cable connector
9. Lift the camera module off the display cover.
Replacing the Camera Module
1. Follow the instructions in
Before You
2. Align the camera module over the screw holes on the display cover.
Begin.
Removing the System
Board).
Removing the WWAN
Module).
Removing the Display
Assembly).
Removing the Display
Bezel).
Removing the Display
Panel).
2
camera module
Begin.
Removing the
Battery) before working inside the