Dell 3008WFP - UltraSharp - 30" LCD Monitor Panduan Pengguna - Halaman 18
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Desktop Dell 3008WFP - UltraSharp - 30" LCD Monitor. Dell 3008WFP - UltraSharp - 30" LCD Monitor 38 halaman. Flat panel monitor
Juga untuk Dell 3008WFP - UltraSharp - 30" LCD Monitor: Setup Manual (2 halaman), Spesifikasi (2 halaman), Brosur (2 halaman)
Halaman Cetak
NOTE:
AUTO ADJUST is only available when you are using the analog (VGA) connector.
2.
Push the
and
buttons to move between the setting options. As you move from one icon to another, the option name is highlighted. See
the following table for a complete list of all the options available for the monitor.
3.
Push the MENU button once to activate the highlighted option.
4.
Push the
and
buttons to select the desired parameter.
5.
Push
to enter the slide bar and then use the
6.
Select the "back" option to return to the main menu or "exit" to exit the OSD menu.
Icon
Menu and
Description
Submenus
EXIT
Select to exit the main menu.
BRIGHTNESS
Use this menu to activate Brightness/Contrast adjustment.
& CONTRAST
Back
Push
Brightness
Brightness adjusts the luminance of the backlight.
Push the
Contrast
Adjust Brightness first, and then adjust Contrast only if further adjustment is necessary.
Push the
The Contrast function adjusts the degree of difference between darkness and lightness on the monitor screen.
Exit Menu
Push
Even though your computer recognizes your monitor on startup, the Auto Adjustment function optimizes the display settings for use
AUTO
with your particular setup.
ADJUST
NOTE: In most cases, Auto Adjust produces the best image for your configuration.
NOTE:
INPUT
Use the INPUT SOURCE menu to select between different video signals that may be connected to your monitor.
SOURCE
or
button, according to the indicators on the menu, to make your changes.
to go back to the main menu.
button to increase brightness and push the
button to increase contrast and push the
to exit the OSD main menu.
AUTO ADJUST option is only available when you are using the analog (VGA) connector.
button to decrease brightness (min 0 ~ max 100).
button to decrease contrast (min 0 ~ max 100).