Dell D14U Manual Pengaturan dan Spesifikasi - Halaman 30
Jelajahi secara online atau unduh pdf Manual Pengaturan dan Spesifikasi untuk Desktop Dell D14U. Dell D14U 36 halaman.
Juga untuk Dell D14U: Pengaturan dan Spesifikasi (37 halaman), Manual Pengaturan dan Spesifikasi (39 halaman), Manual Pengaturan dan Spesifikasi (36 halaman)
Halaman Cetak
Table 27. Power Management (continued)
Option
Block Sleep
Post behavior
Table 28. POST Behavior
Option
Adapter Warnings
Numlock LED
Keyboard Errors
Fast Boot
Extend BIOS POST Time
Full Screen Logo
Warnings and Errors
Manageability
Option
Description
Intel AMT
Allows you to provision AMT and MEB Hotkey function is enabled, during the system boot.
Capability
•
•
•
USB Provision
When enabled Intel AMT can be provisioned using the local provisioning file using a USB storage device.
•
MEBx Hotkey
Allows you to specify whether the MEBx Hotkey function should enable, during the system boot.
•
30
System setup
Description
Allows you to block entering to sleep (S3 state) in OS environment. This option is disabled by
default.
Description
This option lets you choose whether the system displays warning messages when you use certain
power adapters. This option is enabled by default.
Allows you to enable or disable the Numlock feature when your computer starts. This option is
enabled by default.
Allows you to enable or disable the keyboard error reporting when the computer starts. The option
Enable Keyboard Error Detection is enabled by default.
This option can speed up the boot process by bypassing some compatibility steps:
•
Minimal — The system boots quickly, unless the BIOS has been updated, memory changed, or
the previous POST did not complete.
•
Thorough — The system does not skip any steps in the boot process.
•
Auto — This allows the operating system to control this setting (this works only when the
operating system supports Simple Boot Flag).
This option is set to Thorough by default.
This option creates an additional pre-boot delay.
•
0 seconds (default)
•
5 seconds
•
10 seconds
This option will display full screen logo if your image match screen resolution. The option Enable Full
Screen Logo is not set by default.
This option causes the boot process to only pause when warning or errors are detected. Choose any
one of the option:
•
Prompt on Warnings and Errors - default
•
Continue on Warnings
•
Continue on Warnings and Errors
Disabled
Enabled
Restrict MEBx Access - by default
Enable USB Provision - disabled by default
Enable MEBx hotkey—disabled by default